Gibitre instrument計量實驗室是*ACCREDIA校正實驗室，用于校準：
•Shore A、Shore D測試儀符合ISO 7619-1和 ISO 868標準
•IRHD Micro、IRHD-Normal、IRHD- Hard和 IRHD-Low硬度計符合ISO 48標準。
校準在Gibitre instrument計量室（環境條件受控）中進行。
主要特點
•Gibitre對所有主要生產商生產的IRHD和邵氏測試儀進行Accredia校準。
•Gibitre擁有關于硬度計操縱和校準的可靠校準經驗，且每年執行超過300次校準
•校準前和校準后測量的記錄與校準證書一起
提供
•通過預先安排儀器的交付日期，可在收到后24小時內完成儀器的回運。
•不符合Accredia校準要求的儀器將退回，且不收取校準服務費。

Gibitre Instruments’ metrological laboratory is official ACCREDIA calibration laboratory for the calibration of:
• Shore A, Shore D, tester according to ISO 7619-1 and ISO 868 standards
• IRHD Micro, IRHD-Normal, IRHD-Hard, and IRHD-Low hardness testers according to ISO 48 standard.
Calibrations are performed in the metrology room of Gibitre Instruments, with controlled environmental conditions.
Key Features
• Gibitre performs Accredia calibration of IRHD and Shore testers produced by all the major world producers.
• Gibitre has a solid experience regarding the
manipulation and calibration of hardness testers and performs more than 300 calibrations per year
• Recording of pre-calibration and post-calibration measures are provided together with the Calibration certificate
• By pre-arranging the delivery date of the instruments
the back-shipment of the instrument can be done within 24 hours from delivery.
• Instruments that do not meet the Accredia calibration requirements are returned without charging calibration service.